Etched Lace Decorative Window Film
Shopping Basket

Shopping Basket

Items: 0
Subtotal: $0.00
Note: All prices in US Dollars
Etched Lace Decorative Window Film
Etched Lace Window FilmEtched Lace Decorative Window Film
Click to enlarge image(s)

24 inches wide X 36 inches long
This decorative film creates beauty and privacy with the look of beautiful etched glass. These 24 inch x 36 inch panels can be trimmed or combined to fit any size window.
The image is a repeating pattern both left to right and top to bottom, therefore multiple pieces can be matched either vertically or horizontally to cover larger windows or doors.
This film is easy to apply to any smooth glass surface without the use of adhesives and are easily removed if needed. They can be trimmed or combined to fit any size window. The images have a repeating pattern left to right and top to bottom and can be used either vertically or horizontally.

THIS EASY TO APPLY FILM IS ADHESIVE FREE BUT CLINGS TIGHTLY WITHOUT CURLING.

> This easy to apply film is adhesive free and contains the essence of real glass for authentic sparkle and shimmer.
> 90 to 95% UV protection depending upon the film. Filters UV rays and helps save energy. (Keeps room cooler in the summer and warmer in the winter.
> Improves privacy and security while letting in light.
> Diffuses glare and softens harsh sun.
> Obscures a bad view
> Applies with just a spray bottle of water and a couple drops of liquid soap.
> Is easy to trim to size
> Easy to clean
> Not affected by steam or moisture
 
INSTALLATION INSTRUCTIONS
> Measure window and trim film on a smooth flat surface.
> You will need to leave approximately 1/8 inch space between the film and the edge of your glass so that water can be removed from under the film. 
> Remove all dirt and debris from the glass using any commercial glass cleaner.
> Add a few drops of liquid soap to a spray bottle of cold water. Spray a generous amount of the mixture on the glass. 
> MAKE SURE THE FILM AND THE BACKING PAPER DO NOT GET WET BEFORE REMOVING THE FILM FROM THE BACKING PAPER. If these get wet this may ruin your film as it will be difficult to remove the film from the backing paper.
> Peel film from backing paper, keeping backing paper dry and film lint and dust free.
> Position film on the glass. The side of the film applied to the backing paper is the side that will be applied to the glass.
> Squeegee out excess water with squeegee or credit card until all bubbles and water have been removed.
> Do not apply film to glass while the glass is hot.

We Are A Verified Merchant

We Are A Verified Merchant

We Care About Your Security

Copyright © EE2 Inc. Morehead, KY
support@windowfilmanddecals.com